Thursday, January 5, 2012

Wiring Three Way Switches

!±8± Wiring Three Way Switches

The distinction between a proper switch and a three way switch is one supplementary terminal,or connection. A 3 way switch has 2 terminals that are either silver or brass coloured and one concluding that is dark coloured. The silver or brass terminals are called travellers or messengers and the dark coloured concluding is called the common. If all three terminals appear similar in colour, the base concluding will be identified by the word "common" stamped on the back of the switch.

The arrangement of these terminals on the switch can vary depending upon the manufacturer, so check determined to ensure proper identification of the base terminal. In a 3 way switch circuit there will be two 3 way switches and a light or series of lights that are controlled by the switches. As each switch can turn the lights on or off,there needs to be a means by which one switch can recapitulate this back to the other switch. This is the function of the two travellers or messengers and you will notice in the wiring diagrams that regardless of the configuration, the 2 travellers or messenger terminals on each switch are all the time interconnected (trace the red and white conductors of the 3 conductor wire).

As the travellers or messenger terminals are all the time interconnected, the base concluding is the only one left. To understand this terminal, consider for a moment a proper switch that has only 2 terminals. When wiring a proper switch the incoming power feed (hot) conductor is connected to one concluding (usually lowest right) and the outgoing power feed to the lights is connected to the other concluding (usually top right). This is the purpose of the base terminals in a 3 way switch circuit, on one of the two 3 way switches the incoming power feed (hot) conductor is connected to its base concluding and on the other of the two 3 way switches the outgoing feed to the lights is connected to its base terminal.

It is foremost to note that the white conductor in the 3 conductor wire (red, black and white) connected between the two switches is not a neutral. Depending on the switches on/off position either the red or white conductor will be hot.


Wiring Three Way Switches

Etsy Jewellery Compare Prices Great Deals Stihl Ms170 Chainsaw

No comments:

Post a Comment